Konica Minolta CM-M6, Instruction Manual

Page: 105 / 128

102
4
Other F
unctions
„
Connecting via USB Cable
Connect the instrument to a PC with the supplied USB cable IF-A17 (2 m).
Notes
• To connect the instrument to a PC, the dedicated USB driver must be installed. Install the USB driver
supplied with the software that enables connection and operation of the instrument.
• Make sure that the USB connector plug is oriented correctly and connected securely.
• When connecting/disconnecting the USB cable, be sure to hold the connector plug. Do not pull on or
forcibly bend the cable. Otherwise, wire breakage may result.
• Make sure that the cable has sufficient length. Putting tension on the cable may cause connection failure or
wire breakage.
• Firmly push in the USB cable connector that matches the shape of the port (connection terminal) until it can
go in no further.
Memo
The USB communication port of the instrument conforms to USB 2.0.
Operating Procedure
1
Turn the instrument power OFF.
2
Open the connector’s protective cover, and connect
the USB cable mini plug to the USB port on the
instrument.
‹ ‹ Fully insert the connector and ensure the connection is
secure.
3
Connect the A connector of the USB cable to the USB
port on the PC.
4
Turn the instrument power ON.
‹ ‹
When installation of the USB driver is prompted,
specify the USB driver included with the software to
complete the installation.