Konica Minolta BIZHUB C10 User Manual Download Page 210

Page: 210 / 236

Status, Error, and Service Messages

196

PAPER EMPTY

(Displaying alternately)

LOAD PAPER(XX)

Tray X (Tray 1 or
Tray 2) ran out of
paper.

Load paper into the
specified paper tray.

PAPER JAM

(Displaying alternately)

OPEN DUPLEX COVER

Media has misfed in
the duplex option.

Locate and remove the
misfeed.

PAPER JAM

(Displaying alternately)

OPEN FRONT COVER

Media has misfed in
fuser area or trans-
fer roller area.

Locate and remove the
misfeed.

PAPER MISFEED

(Displaying alternately)

OPEN FRONT COVER

Media has misfed
while being pulled
from the tray.

Locate and remove the
misfeed.

PAPER SIZE ERROR

(Displaying alternately)

RESET PAPER(XX)

The size of the
media loaded in the
media tray is incor-
rect.

Load the correct media
size in the specified
tray.

REMOVE ORIG. IN ADF

ID card copying is
specified, but the
document is loaded
into the ADF.

Remove the document
from the ADF. ID card
copying can only be
used with a document
placed on the original
glass.

SCANNER UNIT OPEN

(Displaying alternately)

CLOSE SCANNER UNIT

Open the scanner
unit.

Close the scanner unit.

*SERVER MEMORY FULL*

SMTP Server

The memory of the
SMTP server has
become full.

The server memory is
full. Free up some
space on the disk such
as by contacting your
server administrator.

This message...

means...

Do this...

Summary of Contents for BIZHUB C10













































































































































































































































Search results

Summary of Contents for BIZHUB C10

Reviews:

Related manuals for BIZHUB C10

Brands by name

Popular brands

Konica Minolta BIZHUB C10, User Manual

Search results

Summary of Contents for BIZHUB C10

Reviews:

Related manuals for BIZHUB C10

Brands by name

Popular brands