Konica Minolta 7145 Instruction Manual Download Page 58

Page: 58 / 359

Loading Paper (continued)

2-28

Loading Paper in Multi-Sheet Bypass Tray

Open the Multi-sheet bypass tray located on the right side of the
copier.

When loading large paper, withdraw the right edge of the Multi-sheet bypass tray to
extend it.

Load copy paper, and adjust the paper guides to the paper size.

The loaded paper size will be indicated on the bypass tray key of the Basic Screen.

• Load transparency film one sheet at a time.
• A maximum of 50 80g/m

. sheets can be loaded at one time.

When copying is completed, close the Multi-sheet bypass tray.

Summary of Contents for 7145








































































































































































































































































































































































Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands

Konica Minolta 7145, Instruction Manual

Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands