Konica Minolta 7145 Instruction Manual Download Page 274

Page: 274 / 359

[2] Copier Initial (continued)

13-12

Procedure

Touch

2. Copier Initial

to display the Copier Initial Setting Menu Screen, then touch

Output

to display the Output Mode Initial Setting Screen.

For the machine with FS-112 Finisher, perform the following operation and proceed to
step

To select the exit tray, touch the desired tray key in the EXIT area.
To select the Output mode, touch

SORT

GROUP

To use the Staple mode, touch

STAPLE

NOTES:

1. If

STAPLE

is selected,

SORT

is automatically highlighted.

2. If selecting Stack mode, do not highlight any of the

SORT

GROUP

, or

STAPLE

To select the desired staple location, touch

STAPLE SET

. Touch the desired location on

the Staple Location Initial Setting popup menu, and touch

For the machine with FS-113 Finisher, perform the following operation and proceed to
step

To select the exit tray, touch

MAIN TRAY

SUB TRAY

NOTE:

Select

MAIN TRAY

to specify the Sort or Staple mode.

To select the Output mode, touch

SORT

GROUP

To use the Staple or Punch mode, touch

STAPLE

PUNCH

NOTES:

1. If

STAPLE

is selected,

SORT

is automatically highlighted.

2. If selecting Stack mode, do not highlight any of the

SORT

GROUP

, or

STAPLE

Staple Location Initial Setting popup menu

Punch Position Initial Setting popup menu

Output Mode Initial Setting Screen
(machine with FS-114)

Output Mode Initial Setting Screen
(machine without Finisher)

Output Mode Initial Setting Screen
(machine with IT-101)

Summary of Contents for 7145








































































































































































































































































































































































Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands

Konica Minolta 7145, Instruction Manual

Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands