manualshive.com logo in svg

Konica Minolta 7145, Instruction Manual

Share
Download
Konica Minolta 7145 Instruction Manual Download Page 336

Protect Data in the Document Folder from Access and Tampering

(continued)

- 10 -

6.

Enter the password.

Touch 

Password

 to display the Data Entry Screen.

Use the control panel keypa d to ente r the  pass word without touchin g

Password

, if it consists of numbers only

Use the touch screen keypad and control panel keypad to enter the password (8
alphanumerical characters), and touch 

OK

.

• Alphanumerical characters are case sensitive.
• If a wrong password or fewer than 8 alphanumerical characters are entered

and  the OK key is touched, the warning message "Password does not
match" will appear, and no key will work for five seconds. Enter the correct
user ID after five seconds.

• A password made up of one repeated character will not be accepted.
• If authentication fails, the information will be saved in the audit log.
• User Boxes for which only a password has been set and the System Box for

which a password has been set will be administered according to the above
specifications in Enhanced Security mode.

Touch 

OK

 on the Password Entry Screen.

Regarding subsequent operations for saving data in a User Box and data output, see the
instruction manual for the Document Folder.

Summary of Contents for 7145








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands