Konica Minolta 7145 Instruction Manual Download Page 174

Page: 174 / 359

Positioning Title Pages on the Right Side (Chapter) (continued)

9-8

Touch

Chapter

on the Application Selection Screen.

The Chapter Page Setting Screen will be displayed.

Use the control panel keypad to enter the page number of each title
page.

Touch

SET

after each entry to move to the next key.

To clear an incorrect entry, touch

DELETE

. The entered number will be deleted.

• Entering “0” or the same page number twice will be ignored on the

screen.

• Chapter insertions occur in sequence even if original page numbers are

entered out of sequence.

• When a page number is larger than the total original page count, insertion

occurs as the last page of the document.

• Touch

Booklet

to specify this function directly from the Chapter Page

Setting Screen. The Bookl et Mode Selection popup menu wil l be
displayed.
Touch the desired mode key, then touch

to restore the Chapter Page

Setting Screen.

• To change the selection of paper tray for copying title pages, touch

Copy

Insertion

to use this function. The title pages will be copied using paper

from the insertion tray source. See p. 9-4.

Summary of Contents for 7145








































































































































































































































































































































































Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands

Konica Minolta 7145, Instruction Manual

Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands