Konica Minolta 7145 Instruction Manual Download Page 294

Page: 294 / 359

[8] Key Operator Setting (continued)

13-32

Enter the e-mail address to be informed.
(1) Touch

1. Enable E-Mail Notice

to display the E-Mail Notification ON/OFF Setting

Screen.

(2) Touch

Notification address

to display the E-Mail Notification Address Setting

Screen.

(3) Touch

Key operator E-Mail

to designate the e-mail address of the Key Operator

that has already been specified in the Key Operator data setting.

(4) To newly enter the e-mail address, touch

Enter address

to display the Data Input

Screen, then enter the desired e-mail address from the touch screen keypad. (Max.
64 characters)

NOTE:

More than one address can be entered using comma as a separator.

(5) Touch

to complete the setting, or touch

CANCEL

to restore the previous setting.

The E-Mail Notification Setting Menu Screen will be restored.

Specify the information item.
(1) Touch

2. E-Mail Notify item

to display the E-Mail Notification Item Setting Screen.

(2) Touch the arrow keys

and

at the upper right to scroll the screen.

(3) To select the information item, touch

to highlight it.

(4) Touch

to complete the setting, or touch

CANCEL

to restore the previous setting.

The E-Mail Notification Setting Menu Screen will be restored.

Touch

RETURN

to complete the setting and return to the System/Copier Setting Menu

Screen.

If no further changes are required, turn the machine power OFF then ON for normal
copying operations.

Summary of Contents for 7145








































































































































































































































































































































































Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands

Konica Minolta 7145, Instruction Manual

Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands