Konica Minolta 7145 Instruction Manual Download Page 315

Page: 315 / 359

[18] HDD Setting Menu (continued)

13-53

Touch

1. HDD Format

2. HDD capacity confirm/delete

, or

3. Unnecessary Box delete

as required.

To format the HDD:
(1) Touch

1. HDD Format

to display the HDD Format Screen.

(2) Touch

YES

. All the data stored in the HDD will be cleared.

Turn OFF then ON the main power switch to complete the formatting procedure.
Or, touch

to cancel.

Touch

RETURN

on the HDD Format Screen to restore the HDD Setting Menu

Screen.

To check the current state of the HDD capacity or delete the HDD data:
(1) Touch

2. HDD capacity confirm/delete

to display the HDD Capacity Confirm/Delete

Screen.
The used area and whole area of the HDD capacity will be indicated in MB, and the
available area in percentage.

(2) To delete the data stored in the HDD, touch

DELETE

under the desired data item.

The popup menu will appear to confirm that the selected data should be deleted.

(3) Touch

YES

to delete the data, or

to cancel. After touching

YES

, be sure to turn

OFF the main power switch, then turn it ON again.
Touch

RETURN

to restore the HDD Setting Menu Screen.

To delete the unnecessary box:
(1) Touch

3. Unnecessary Box delete

to display the Unnecessary Box Delete Screen.

(2) Touch

YES

to delete the unnecessary box, or

to cancel. After touching

YES

, be

sure to turn OFF the main power switch, then turn it ON again.
Touch

RETURN

to restore the HDD Setting Menu Screen.

Touch

RETURN

on the HDD Setting Menu Screen to restore the System/Copier Setting

Menu Screen.

If no further changes are required, turn the machine power OFF then ON for normal
copying operations.

Procedure (RAM Disk Format)

System/Copier Setting Menu Screen

HDD Setting Menu Screen

File Format Screen

Key Operator

Mode

KRDS Host

Density Shift

Application

Customize

List Print

Memory

Switch

Power Save

Touch Panel

Adjustment

Weekly

Timer

Key Operator

Setting

Panel Contrast

Paper Type

Lock Job

Memory

User

Account

Preset Key

Copier Initial

System Initial

Key Operator

Mode

HDD Setting

Finisher

Adjustment

Machine Mail

Address

Summary of Contents for 7145








































































































































































































































































































































































Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands

Konica Minolta 7145, Instruction Manual

Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands