manualshive.com logo in svg

Konica Minolta 7145, Instruction Manual

Share
Download
Konica Minolta 7145 Instruction Manual Download Page 170

Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)

9-4

If using thick or other paper for covers, load them into the Multi-sheet
bypass tray and touch 

BYPASS

 in step 

4

.

Be sure that the trays for copy paper, front/back covers, and insertions have
the same paper size loaded.

2.

Touch 

APPLICATION

 on the Basic Screen.

The Application Selection Screen will be displayed on the touch panel.

When starting a new copying job, be sure to close the RADF securely, then
press [

AUTO RESET

].

3.

Touch 

Sheet/Cover Insertion

 on the Application Selection Screen.

The Sheet/Cover Insertion Screen will be displayed.

4.

Select the cover and insertion sheet tray source.

Touch 

CHANGE TRAY

 to select the cover and insertion sheet tray source.

The same tray will be specified as the source of insertions and covers. If using thick or
other paper for covers, load them into the Multi-sheet bypass tray and touch 

BYPASS

individually on the screen.

If  BYPASS is specified as the initial insertion sheet tray source  in the Key
Operator setting, both cover and insertion sheet will be fed from BYPASS only.

Summary of Contents for 7145








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands