Konica Minolta 7145 Instruction Manual Download Page 198

Page: 198 / 359

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)

(continued)

9-32

Touch

Vert./horiz

Specify the vertical and horizontal widths of the scanning area.

Touch

SET

to display the Vertical/Horizontal Width Setting popup menu.

Use the up/down arrow key or numeric keypads to enter the width from 10 to 150 mm
in 1 mm increments.

Touch

on the popup menu to restore the Repeat Mode Selection Screen.

Touch

The Application Selection Screen will be restored.

Touch

on the Application Selection Screen.

The Basic Screen will be restored.

Select the desired magnification and paper size.

• APS and AMS are automatically released, and 1.00 (100%) is selected

as a magnification ratio.

• Copy mode is automatically set to 1-1. When selecting 1-2 mode, Platen

store mode will function automatically.

Enter the desired print quantity from the control panel keypad.

See p. 3-7 for details on setting print quantity.

Position original FACE DOWN on the platen glass.

See the illustration on p. 9-31 for details.

Summary of Contents for 7145








































































































































































































































































































































































Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands

Konica Minolta 7145, Instruction Manual

Search results

Summary of Contents for 7145

Reviews:

Brands by name

Popular brands