Konica Minolta 7145, Instruction Manual

Page: 166 / 359

8-8
Copying Non-Standard Size Originals (Non-
Standard Size)
Feeding special size originals through the RADF without selecting Non-standard size
mode may cause the copier to stop scanning and mistakenly sense that the size
detection sensor has malfunctioned or cause a paper misfeed.
Using Non-standard size mode, the copier will search and copy onto the standard size
copy paper that is closest to the original size.
Specifications for Non-Standard Size
❒
Use RADF. Platen glass is not available.
❒
Incompatible Conditions: APS, AMS, Mixed Original, Folded Original, Combination,
Booklet, Image Insert, Dual Page, Flip Side 2, Repeat, Frame/Fold Erasure, AUTO
Layout, Image Shift, Non-Image Area Erase, Stamp, Overlay
1.
Touch ORIGINAL MODE on the Basic Screen.
The Special Original popup menu will be displayed.
When starting a new copying job, be sure to close the RADF securely, then
press [
AUTO RESET ].
2.
Touch Non-standard size .
3.
Touch OK to return to the Basic Screen.
4.
Select additional copying features, as desired.
5.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
6.
Position mixed original(s) FACE UP in the document feeder.
• See p. 3-2 for details on positioning originals.
• Use RADF store mode (p. 3-26 to p. 3-27) when the original count
exceeds 50.
7.
Press [ START ].
When the finisher / inner / paper exit tray capacity is exceeded due
to the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.