Komatsu PC118MR-8, Operation And Maintenance Manual

Page: 59 / 418

SAFETY
SAFETY MACHINE OPERATION
2-35
SAFETY MACHINE OPERATION 2
STARTING ENGINE 2
If there is a warning tag hanging from the work equipment
control lever, do not start the engine or touch the levers.
CHECKS BEFORE STARTING ENGINE 2
Carry out the following checks before starting the engine at the beginning of the day's work.
q
Remove all dirt from the surfaces of windows, headlights and working lights and check the that the lights are
functioning correctly.
q
Clean the floor of the cockpit and the controls (pedals and levers) from any oil and grease and excessive dirt
on the floor (earth, stones, etc...)
q
Check fluid levels (coolant, fuel, oils), air filter and possible damage to the electrical system.
q
Check the proper functioning of instruments and indicators.
q
Adjust the angle of the rear-view mirror, so that, seen from the operator seat, the lower rear part of the
machine (which isn’t usually visible due to the engine hood) can be seen without problems. For this
adjustment operation, see paragraph "Rear view mirrors (3-124)".
q
Check that there are no persons or obstacles above, below, or in the area around the machine.
q
Adjust the operator's seat to a position where it is easy to carry out operations, and check that there is no
damage or wear to the seat belt or mounting clamps.
WEAM014802