manualshive.com logo in svg

Komatsu PC118MR-8, Operation And Maintenance Manual

The Komatsu PC118MR-8 Operation And Maintenance Manual is essential for understanding how to operate and maintain this powerful machine. You can download the manual for free from manualshive.com, providing you with all the information you need to ensure your PC118MR-8 is running at its best.

Share
Download
background image

SAFETY

SAFETY LABELS

2-31

q

LOWER THE BOOM

With an arm extended in horizontal position and closed 
fingers, point the thumb downwards.

q

FOLD THE ARM

With both hands clasped, point the thumbs inwards.

q

EXTEND THE ARM

With both hands clasped, point the thumbs outwards.

q

FOLD THE BUCKET

Keep one hand still and closed. Rotate the other hand 
vertically with the thumb pointed towards the clasped hand.

q

OPEN THE BUCKET

Keep one hand still and open. Rotate the other hand 
vertically with the thumb pointed towards the open hand.

RKA32990

WEAM014802

Summary of Contents for PC118MR-8



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PC118MR-8

New Holland EH130 Service Manual preview
EH130
Brand: New Holland Pages: 41
Daewoo Solar 300LC-V Manual preview
Solar 300LC-V
Brand: Daewoo Pages: 658

Brands by name

Popular brands

Load more brands