Komatsu PC118MR-8, Operation And Maintenance Manual

Page: 42 / 418

SAFETY LABELS
SAFETY
2-18
FIRE EXTINGUISHER AND FIRST AID KIT 2
Always follow the precautions below to prepare for action if any
injury or fire should occur.
q
Make sure there are fire extinguishers and read the labels
to make sure you know how to use them in emergency
situations.
q
Carry out periodic inspection and maintenance to ensure
that the fire extinguisher can always be used.
q
Provide a first aid kit in the storage point. Carry out periodic
checks and add to the contents if necessary.
q
Make sure that you have the phone numbers of the
persons or structures you may need to contact in case of
an emergency at hand (either at the work site and where
maintenance operations are performed).
SAFETY EQUIPMENT 2
q
Make sure that all the guards and covers are in the correct position. Have guards and covers changed or
repaired if damaged. Neither use the machine without guards, nor remove the guards when the engine is
running.
q
Always use the proper safety devices to lock the machine when parking and fasten the safety belt.
q
Do not remove the safety devices and always keep them in good operating conditions.
q
Any improper use of the safety devices may result in serious injuries or even death.
KEEP MACHINE CLEAN 2
q
If water gets into the electrical system, there is a hazard
that it will cause malfunctions or misoperation. Do not use
water or steam to wash the electrical system (sensors,
alternator, starting motor, solenoid valves, connectors).
q
If inspection and maintenance is carried out when the
machine is still dirty with mud or oil, there is a hazard that
you will slip and fall, or that dirt or mud will get into your
eyes. Clean the machine carefully.
WEAM014802