Komatsu PC118MR-8, Operation And Maintenance Manual

Page: 251 / 418

FUNCTIONING
USE OF THE MACHINE AND RELATED CONTROLS
3-167
WARNING
q
Only the hook situated on the rod of the bucket should be used as a coupling point for the purpose of
lifting objects.
q
Do not use other coupling points.
q
It is forbidden to weld hooks or ears to the bottom of the bucket.
q
If the machine is not equipped with the appropriate hook, contact the Komatsu distributor.
q
Fitting a lifting hook must be monitored and certified by the competent Authorised Body
q
It is forbidden to exceed the lifting load limits specified in the machine diagrams.

For detail see "LIFTING CAPACITIES TABLES (3-168)".
NOTE:
q
Ensure that the lifting hook and the load handling cables are of sufficient dimensions to handle the load to be
lifted, and that they are equipped with an effective anti-release device.
q
Use the commands gently and progressively in order to maneuvre the load movement with precision.
q
Always maintain the load as close as possible to the ground so as to be able to lay it down quickly in the event
that the slightest instability of the load or of the machine is detected.
q
After having positioned the load, uncouple it.
WARNING
q
Failure to observe the aforementioned precautions may result in serious or fatal damage to persons.
q
It is absolutely forbidden to move the machine with the load suspended as the load may oscillate and
pose a risk to objects and persons, as well as to the machine itself.
WEAM014802