Komatsu Utility PC12R-8 MISTRAL, Shop Manual

Page: 16 / 324

NOTE:
(1) When fuel sulphur content is less than 0.5%,
change oil in the oil pan ebery periodic mainte-
nance hours described in operation and mainte-
nance manual.
Change oil according to the following table if fuel
sulphur content is above 0.5%.
Fuel sulphur content
Oil change interval in engine oil
pan
0.5 to 1.0% 1/2 of regular interval
Above 1.0% 1/4 of regular interval
(2) When starting the engine is weathers temperature
below 0ëC, be sure to use engine oil SAE 10W,
SAE 20W-20, even if weather temperature goes
up to 10ëC day time.
(3) Use classification CD as engine oil, if use classifi-
cation CC, reduce the engine oil change interval to
half.
(4) Use original products, which have characteristics
specifically formulated and approved for the en-
gine, the hydraulic circuit of equipment and for re-
ductions.
TABLE OF OIL AND COOLANT QUANTITIES
00-12
PC12R-8 PC15R-8
RESERVOIR
KIND OF
FLUID
AMBIENT TEMPERATURE CAPACITY (
<
)
Specified Refill
Crankcase sump 2.8 2.8
Hydraulic circuit 24 22
Final drive
(each)
0.4 0.4
Fuel tank
FUEL
20 Ð
Engine coolant
system
WATER+
ANTI-FREEZE
3.2 Ð
WATER
3.2 Ð
PERMANENT
LIQUID
3.2 Ð
] ASTM D975 N. 1
ASTM: America Society of Testing and Materials
SAE: Society of Automotive Engineers
API: American Petroleum Institute
MIL: USA Military Specification
CCMC: Common Market Constructors Committe
Specified capacity: Total amount of oil including oil for components and oil in piping.
Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance.
±20 ±10 0 10 20 30ëC
SAE 10W
SAE 20W-20
SAE 30
SAE 40
SAE 10W
SAE 10W
]
ASTM D975 N. 2