Kollmorgen AKM, Instruction Manual

Page: 8 / 212

AKM Installation | 1 English
1.2.4 Handling
1.2.4.1 Transport
l
Climate category 2K3 according to IEC 60721-3-2, EN61800-2
l
Temperature: -25...+70°C, max. 20K/hr change
l
Humidity: rel. humidity 5% - 95% , no condensation
l
Only by qualified personnel in the manufacturer’s original recyclable packaging
l
Avoid shocks, especially to the shaft end
l
If the packaging is damaged, check the motor for visible damage. Inform the car rier and, if
appropriate, the manufacturer.
Transport of motors with a weight of more than 20kg
Lifting eyes must be used to safely transport AKM7 and AKM8 motors (> 20kg). Observe any
transport instructions included in the packaging of the motor.
We recommend the transport tool ZPZM 120/292 for moving the motors.
Suspension Unit ZPMZ 120/292 consists of a beam, suspended to the crane hook and two
double-run chain suspenders.
DANGER
Suspended load. Risk of death if load falls. Never step under the load,
while the motor is raised.
l
The fastening screws of the lifting eyes must be fully screwed in.
l
The lifting eyes must be positioned on the supporting surface in an even and flat manner.
l
Prior to use, check the lifting eyes for secure fitting and any obvious damages (corrosion,
deformation).
l
Lifting eyes with deformations must not continue to be used.
8 Kollmorgen | kdn.kollmorgen.com | June 2018