Koden MDC-7006, Installation Manual

Page: 99 / 160

MDC-7000/7900 Series Chapter 5 Troubleshooting and on board repair
0092669002-07 5-3
B W 194 5 26 LAT/LON data is
unavailable.
GLL or GGA, GNS, RMC, RMA are not
inputted.
B W 194 6 27 DATUM data is
unavailable.
DTM is not input.
B W 194 7 28 TIME data is unavailable. ZDA or RMC, GGA are not input.
B C 194 8 60 AIS no OS COG/SOG
data.
Own ship
’s data that is necessary for AIS
are not input.
B W 194 9 61 AIS no data.
There is no AIS data.
VDM is not input from AIS.
B C 194 13 29 HDG is manual. There is not heading signal.
B C 194 14 30 SDP is manual. There is not speed signal.
B C 194 15 31 COG/SOG is manual.
There are not ground course and speed
signal.
B C 194 16 32 SET/DRIFT is manual. There is not tide signal.
B C 194 17 33 LAT/LON is manual. There are not latitude and longitude signal.
B C 194 18 80 Receive alert of any signal
or sensor in use.
Receive alert of any signal or sensors in
use.
B C 194 25 109 AIS no data.
There is no AIS data.
VDM is not input from AIS.
B C 194 26 110 SPD is unavailable. VBW, VTG, RMA or RMC are not inputted.
B C 194 27 111 COG/SOG is unavailable. COG/SOG is not inputted.
B W 999 1 89 Test alert only. Under alert test.
A W 10000 1 53 Echo area alarm detected. Images are detected in echo alarm area.
A W 10000 2 15 Echo map area alarm
detected.
Images were detected in map area.
B C 10000 3 11 Activated AIS target
without HDG or COG.
There is neither ship
’s bearing nor fairway
of AIS active target input data to HDG or
COG.
B C 11000 1 14 Nav line exceeded. Own ship crossed the Nav line.
B C 11000 2 62 Received AIS message. Received AIS message to OWN ship.
B C 12000 1 16 Change to relative
bearing.
True bearing is not inputted.
B C 12000 2 17 Change to relative vector. VBW, VTG or VDR are not inputted.
B C 12000 3 18 Change to relative past
position.
VBW, VTG or VDR are not inputted.
B C 12000 4 19 Change to head up.
THS, HDT, HDM or VTG, RMA, RMC are
not inputted.
B C 12000 5 20 Change EBL origin
position.
THS, HDT, HDM or VTG, RMA, RMC are
not inputted.