Koden MDC-5204, Installation Manual

Page: 58 / 182

Chapter 3 Installation method MDC-5200/5500 Series
3-34 0092655002-03
3.3.2.3 Flush Mounting of MRD-109
(4mm screw for 4holes)
(3
9
/6
4
)
1
5
.5
(1
3
1
7
/6
4
)
337
(1
4
3
1
/6
4
)
368
(39/64)
15.5
(11 59/64) 303
(39/64)
15.5
(13 5/32)
334
(1
4
3
1
/6
4
)
368
(13 45/64)
348
Unit : mm(inch)
Preparation:
(1) Cut an opening and drill four
nut-holes with the size shown in
Figure 3.14, on the side for
attachment of a Display unit on a
panel.
(2) Remove four knobs that hold the
Display unit to the mounting
bracket.
(3) Remove four corner guard caps.
(4) Remove the Display unit from the
mounting bracket and set it on the
level place.
Figure 3.14 Opening and holes for mounting a Display unit
Figure 3.15 Flush Mounting the Display unit
Installation:
(1) Fit the Display unit in the precut opening of the panel.
(2) Secure the Display unit with four corners fastened with 4 mm screw as shown in the following
figure.
(3) Replace the four corner guard caps.
Display unit
M4 screw
(four places)
Corner guard cap
(four places)