MDC-5200/5500 Series
Chapter 4 Setup after installation
0092655002-03
4-25
4.2.10 Changing the baud rate of I/O port J3, J5 and J6
Each I/O port serial baud rate can be modified to speed of connected device. Selectable rate is 4800,
9600, 19200 or 38400.
Default value per port is set as follows:
J3: 38400 bps
J5: 4800 bps
J6: 4800 bps
OP1: 38400 bps
OP2: 4800 bps
OP1 and OP2 port will be displayed when JB-35 is connected to J3.
Example of change of setting: J3 port 38400 bps => 4800 bps
Select [MAINTENANCE] => [I/O] => [BAUDRATE] => [J3] => [4800] and set with ENT key.
4.2.10.1 Setting all I/O ports automatically
This radar can set the format of all I/O ports automatically by following procedure.
(1) Press MENU
key to display “Menu”.
[MAINTENANCE] => [I/O] => [BAUDRATE] => [AUTO SETUP] => [GO], and press ENT key.
About 30 sec. later all I/O ports can be set by input signals connected to external devices.
Summary of Contents for MDC-5204
