Koden MDC-5204, Installation Manual

Page: 54 / 182

Chapter 3 Installation method MDC-5200/5500 Series
3-30 0092655002-03
3.3.1.2 Flush Mounting for MRD-111
Preparation :
(4mm screw for 4holes)
(5
/8
)
16
(1
2
1
/8
)
308
(1
1
1
3
/1
6
)
300
(5/8)
16
(10 25/32)
274
(5/8) 16
(12 3/64) 306
(1
0
3
5
/6
4
)
268
(12 1/8)
308
Unit : mm(inch)
Installation:
(1) Place the Display unit in the precut opening on the panel.
(2) Secure the Display unit with four corners fastened with 4 mm screw as shown in the following figure.
(3) Fit in four corner guard caps.
Display unit
M4 screw (four places)
Corner guard cap (four places)
Figure 3.8 The opening and nut-holes for Display unit
(1) Cut an opening and drill 4.0 mm (in the
case of fixed nut) four nut-holes with the
size shown in Figure 3.8, on the side for
attachment of a Display unit on a panel.
(2) Unscrew two knob bolts that hold the
Display unit to the mounting bracket.
(3) Remove the Display unit from the mounting
platform and put it on a level place.
(4) Detach four corner guard caps.
Figure 3.9 Mounting the Display unit into place