Koden MDC-5204, Installation Manual

Page: 85 / 182

MDC-5200/5500 Series Chapter 4 Setup after installation
0092655002-03 4-15
4.2.1 Setup TIME
Set up time related items to be displayed in the upper left part of the display (Upper disp area) or own
ship data in the lower of the display (
“ASSISTANT INFO DISP” area).
Select information source of time to be indicated.
(1) Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [I/O] => [TIME] => [TIME] => [ZDA] or [CLOCK], and press ENT key.
CLOCK: Internal clock of the radar
Note:
• When [TIME] sets to [ZDA], and RMC or GGA sentence is received without ZDA, only time data will
be displayed.
• When the battery runs low, the internal clock of the radar will not always work properly. Please
exchange t
he internal battery. (Refer to “5.4.2 Replacement of Internal Battery”)
In order to use the internal clock of the radar, time set is required.
(1) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [I/O] => [TIME] => [TIME] => [CLOCK], and press ENT key.
Set the internal clock for year, month and day by UTC.
(1) Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [I/O] => [TIME] => [CLOCK SET] => [DATE] => to highlight the value
of [Day/Month/Year]. Move the trackball/joystick up or down to match it to the coordinated
universal time, and then press ENT key.
Set the internal clock for time by UTC.
(1) Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [I/O] => [TIME] => [CLOCK SET] => [TIME] => to highlight the value
of [hour: minute]. Move the trackball/joystick up or down to match it to the coordinated universal
time, and then press ENT key.
[MENU] => [SYSTEM] =>
[UPPER DISP] => [TIME]
UTC or LOCAL TIME
[MENU] => [DISPLAY] => [ASSISTANT
INFO DISP] =>
[LEFT], [CENTER] or [RIGHT] =>
[OWN SHIP INFO]