Koden MDC-5204, Installation Manual

Page: 82 / 182

Chapter 4 Setup after installation MDC-5200/5500 Series
4-12 0092655002-03
4.1.11 LOGO
This radar can display your favorite picture or characters at wait or standby mode.
It is necessary to load data as
“logo.bmp” file beforehand to let you display this.
How to make and load the data file
(1) Edit a letter or picture in 256 colors of bitmap using PC. Size is up to 512x384 pixels.
The black color is not displayed as a transparent color on the screen.
(2) Save it as
“logo.bmp” file to an SD memory card.
(3) Insert SD memory card in the card reader on front panel.
(4) Press MENU key to display
“Menu”.
Select [MAINTENANCE] => [STARTUP] => [LOGO] => [LOAD] => [GO], and press ENT key.
(5) 5 sec. later, remove SD memory card from the card reader.
(6) Select [MAINTENANCE] => [STARTUP] => [LOGO] => [LOGO] => select [WAIT] or [STANDBY]
And press ENT key.
WAIT: Logo is displayed during countdown time.
STANDBY: Logo is displayed during standby mode.
CAUTION: Put the cover firmly after the SD card Insert /Remove. Water protection of the Display
unit is not guaranteed when the card reader cover is removed.
KODEN