Kodak s1740, User Manual

Page: 65 / 86

A-61593 September 2007
4-13
OCX010 Command document
number invalid Internal error in document processing.
Solution : Jam handling.
OCX011 Pockets not empty At least one pocket is not empty.
Solution : Check the pockets and empty them if required.
OCX012 Optic-Module does not
react An optic module does not react.
Solution : Reset the scanner.
OCX013 Endorser-Module does
not react The Endorser module does not react.
Solution : Reset the scanner.
OCX014 Encoder-Module does
not react The Encoder module does not react.
Solution : Reset the scanner.
OCX015 Control does not react The machine control does not react.
Solution : Reset the scanner.
OCX016 Black and White-
Module does not react The module for black and white images does not react.
Solution : Reset the scanner.
OCX017 Gray-Module does not
react The module for gray images does not react.
Solution : Reset the scanner.
OCX019 OCR-, MICR-, or BCR-
Module does not react The OCR-, MICR- or BCR- module does not react.
Solution : Reset the scanner.
OCX020 Download memory
overflow Download memory overflow.
Solution : Reset the scanner.
OCX021 Download not desired
because version does
not match Version does not match.
Solution : Reset the scanner.
OCX022 Error while initialization An error occurred during the initialization. See the log for more
information.
Solution : Check the settings and retry.
OCX023 Scanctrl is still running Scan Control is already running or is still running.
Solution : Wait until the running program has finished and start it again.
OCX024 Invalid parameter Invalid parameter. See the log for more information.
Solution : Wait until the program is finished running and start it again.
OCX025 Selected image is not
available There is an image expected and the scanner is not receiving it.
Solution : Check the settings and retry.
OCX026 Unknown image type You have selected an invalid image type.
Solution : Check the settings and retry.
OCX027 Error while saving data Error occurred while saving data.
Solution : Finish the program.
OCX028 Wrong path The path is not valid. See the log for more information.
Solution : Enter the correct path.
OCX029 Command not allowed
in this state The scanner received a command which is only allowed in the Idle state.
Solution : Jam handling.
OCX030 No document in
Internal state The number of the document is invalid.
Solution : Jam handling.
OCX031 General error Solution : Restart the scanner.
OCX032 Communication error
with machine The communication with the scanner has been interrupted.
Solution : Restart the scanner.
OCX033 Error in machine
acknowledge The scanner command received something unacceptable.
Solution : Restart the scanner.