Kodak s1740, User Manual

Page: 54 / 86

4-2 A-61593 September 2007
CS20 Gate at pocket (2).(3)
was opened
(Sensor{1}) There is a problem at the pocket access door.
Solution : Check the pocket access door to be sure it is securely latched
and there are no jammed documents. If the problem persists, call
Service.
CS21 Gate at pocket (2).(3)
was opened
(Sensor{1}) There is a problem at the pocket access door.
Solution : Check the pocket access door to be sure it is securely latched
and there are no jammed documents. If the problem persists, call
Service.
CS22 Document jam at light
sensor (1) in module
(0) Document jam detected.
Solution : Check for a document jam and clear the jam. If there is no
document jam, call Service to have the light sensor checked.
CS26 Gap between two
documents too small The gap between two documents was too small.
Solution : Collect the two documents and refeed.
CS27 Document is skewed,
too short to too long There is a skewed document on the track.
Solution : Collect the skewed document and rescan.
CS30 Double feed Two documents have been fed together.
Solution : Collect the two documents and refeed.
CS35 Pocket code Pocket command invalid.
Solution : Check the Destination field in the Document List. Avoid
running other programs simultaneously.
CS36 Pocket (2).(3) are full A pocket is full or a document did not get deposited correctly.
Solution : Empty the full pocket or inspect the pockets to see which
document did not get deposited correctly and fix it.
CS40 Speed not achieved
(check cover switches) Cover is not closed properly.
Solution : Check all covers and access doors to be sure they are closely
securely.
CS50 Internal error found in
module (0) Internal error.
Solution : Call Service.
CS55 Feeder stopped
because of user
command Informational . You have stopped the operating system software.
CS60 Transport not empty There are documents on the track.
Solution : Clear the documents from the track.
CS65 Feeder empty There are no documents in the feeder.
Solution : Put documents in the feeder and continue feeding the
documents or finish the run.
CS70 Machine is ready Informational . The scanner is ready.
CS99 Control error. Reason
unknown Internal error.
Solution : Close or cancel the run.
CS221 Document jam in
module pocket at
pocket (2).(3) Document jam detected.
Solution : Clear the document jam. If there are no jammed documents,
call Service.
CS222 Document jam in
module pocket Document jam detected.
Solution : Clear the document jam. If there are no jammed documents,
call Service.