2-4
A-61593 September 2007
Machine Control menu
The Machine Control menu provides the following options.
Continuous Feed
— starts the feeder and will continue feeding
documents until no more documents are on the continuous feeder.
Single Feed
— starts the feeder and feeds one document.
Define Continuous Feed and Single Feed
— allows you to enable or
disable double feed detection.
Thick Feed/Special Feed
— this menu item will be
Thick Feed
if
double feed detection
is disabled (default). If
double feed detection
is
enabled, it will be
Special Feed
. This button allows you to disable
endorsing
,
encoding
or
double feed detection
on the next document.
Define Special Feed
— allows you to enable or disable double feed
detection so you can process unusual documents.
Pause
— pauses the scanner. The transport will stop when all
documents have been deposited in a pocket/tray.
Clear Track
— when a document jam occurs, before manually
removing documents, select
Clear Track
. This will deposit any
documents in the track to the overflow pocket. Any remaining
documents will need to be removed manually.
Jam Cleared
— when a document jam has been cleared, select
Jam
Cleared
to return the scanner to the
Idle
state.
Look Ahead
— displays the Look Ahead table when you are using
controlled runs.
Monitor
— displays an additional image window which allows you to
view the front and rear of an image at the same time.
