Kodak s1740, User Manual

Page: 59 / 86

A-61593 September 2007
4-7
LOG22 Sequence error According to the defined sequence control, the document does not fit the
sequence.
Solution : Submit an acceptable document.
LOG32 Initialization error in
logic While the run is open, the assignments or decisions may not relate to the
base text fields.
Solution : Check the assignments and decisions of the Run Definition.
LOG40 Pause forced by logic
order - clear pockets Logic caused a stop.
Solution : Empty the pockets.
LOG41 Pause forced by logic
order - pockets full Logic caused a stop.
Solution : Empty the pockets.
LOG50 Leaving max.
document to be
scanned: (0) in this run
- please close run Only 65534 documents can be scanned in one run.
Solution : Close the run, be sure you have less than 65534 documents in
the run and start again.
LOG52 DoubleFeed detected
by logic at document
(1) A double feed was detected.
Solution : Find the double fed document and rescan.
Control of the Operating System Software errors
NBM01 General error from
MachineManager Undefined fields from the Machine Manager.
Solution : See what other scanner “state” messages are being
displayed.
NBM03 Pockets not empty or
machine parameter
error Parameter error.
Solution : Check the Run Definition.
NBM04 Machine init error There is an initialization problem at the scanner interface.
Solution : Close the operating system software, turn off the scanner and
turn it back on. Then restart the software.
NBM05 Wrong parameter in
Run Definition No valid Run Definition.
Solution : Check the Run Definition.
NBM10 Item could not taken to
Item Buffer The Document List is full.
Solution : Close the run and restart it.
NBM11 Some options failed for
Doc (1) Options such as, Gray Front, OCR1, are not executed successfully.
Solution : Refeed the document.
NBM12 Actual Pocket error for
Doc (1) Destination pocket is not defined, therefore the document cannot be
identified.
Solution : Check the dimensions of the document and the Run Definition.
With secondary sorts, check the number of the effective pockets in Split.
NBM13 Document (1) has
incorrectly detected
DocData Scanner error.
Solution : Close the run and restart.
NBM14 Missing OCR1-Data for
Doc (1) Scanner error.
Solution : Close the run and restart.
NBM15 Missing OCR2-Data for
Doc (1) Scanner error.
Solution : Close the run and restart.
NBM16 Missing MICR-Data for
Doc (1) Scanner error.
Solution : Close the run and restart.
NBM17 Missing BCR-Data for
Doc (1) Scanner error.
Solution : Close the run and restart.
NBM18 Missing Image-Data for
Doc (1) Scanner error.
Solution : Close the run and restart.