background image

20-427 Owner’s Manual Draft 

RadioShack 
 
20-427 
PRO-2054 300 Channel Mobile/Base Scanner 
 
Please read this user’s guide before installing, setting up and using your new product 

www.radioshack.com

 
 
Thank you for purchasing your Pro-2054 300 channel Mobile/Base scanner from 
RadioShack. You can mount your scanner in a fixed position and use it as a base scanner or 
you can use it as a mobile scanner by mounting it in a vehicle. This scanner lets you scan 
conventional transmissions, and is preprogrammed with search banks for convenience. By 
pressing a one touch search key, you can quickly search those frequencies most commonly 
used by public service and other agencies without tedious and complicated programming. 
 
what’s included 
 
user’s guide 

quick start guide  

preloaded data addendum 

Scanner 

 Antenna DC 

cable 

w/fuse 

 AC 

adapter 

DIN sleeve and keys (2)   

Mounting bracket 

Knob (2)  

Rubber washer (2) 

Lock washer (2) 

Screw (2) 

Rubber foot (3) 

 
contents 
 
will add 
 
© 2005 RadioShack Corporation. 
All Rights Reserved. 
 
RadioShack, RadioShack.com, Hypersearch, Hyperscan, and Adaptaplug are trademarks 
used by RadioShack Corporation. 

 

Page 1 of 36 

Summary of Contents for 20-427 PRO-2054





































Reviews: