3-6
A-61593 September 2007
5. Find the last document with an
OK
state and verify that it was
deposited in the pocket correctly.
6. If the document jam has been cleared correctly, all the documents
on the Document List will be highlighted in green and are in the
requested pocket; and all documents effected by the document jam
will be in the feeder ready to be rescanned.
7. Click
Jam Cleared
. The documents in the feeder will be rescanned
and displayed in the Document List (highlighted in green).
NOTE: Jammed documents that were highlighted in red or violet
are deleted and marked gray. These documents are not
stored in the output file.
Extended jam clearing
During extended jam clearing additional states and colors appear in the
Document List. Extended jam clearing can only be performed by a
System Administrator or someone who has permission for this task.
Documents marked for extended jam clearing are highlighted in blue or
yellow.
Blue
— indicates that the document was scanned correctly and is
labeled with
Mark Jam
.
Mark Jam
indicates that you can delete this
document.
Yellow
— indicates that the document was scanned correctly but did
not get deposited in the correct pocket. You can use
No Jam
or
Mark
Jam
in a row above to unmark it. After selecting
Jam Cleared
, the
document will be marked as
OK
.
•
No Jam
— use if the document scanned properly and you want to
manually move it to the correct pocket without rescanning it.
•
Mark Jam
— use if you want to change status of some documents
marked as the
wrong pocket
to
OK
. You will manually have to move
the documents to the correct pocket.
