A-61593 September 2007
3-17
Performing a Print
test
If you have the optional Multi-Line Endorser /
Kodak
s1700 Capture
System periodically you may need to perform a print test to ensure that
the ink jets are functioning properly. To run a print test.
From the Run Selection window:
1. Select
MZI Demo
and click
Select
.
2. Place approximately 10 blank documents (larger than check-size) in
the feeder.
3. Click
Run
.
4. Visually inspect the pattern of the print test.
• If the pattern is complete, the endorser is working properly.
• If the pattern is incomplete, be sure the ink cartridge is installed
correctly and run the test again.