A-61593 September 2007
3-13
8. In the Property Panel above, there are three runs necessary to sort
the sheets. The next run is the first one. The rct file
Tray20Pass2_RCT_Run1.xml
will be used. Open this file in the
ProSort/Table/Scan
directory.
<?xml version=”1.0” encoding=”UTF-8” ?>
-<FOLDER>
- <SHEET ID=”
0418700010000225
” TYPE=”
German check”
>
<INFO TYPE=”TXT”>20</INFO>
<INFO TYPE=”BLZ”>513800040</INFO>
<INFO TYPE=>KTO”>0939652400</INFO>
<INFO TYPE=”MZF”/>
<INFO TYPE=”DOC_LENGTH”>1494</INFO>
<INFO TYPE=”DOC_HEIGHT”>1059</INFO>
-
<INFO TYPE=”OCR1_DATA”>
<![CDATA[ 0939652400>0000001049= 51380040< 20> ]]>
</INFO>
<INFO TYPE=”
_Split_VirtualDestination”>25
</INFO>
<INFO TYPE=””DESTINATION”>102</INFO>
</SHEET>
</FOLDER>
The
Destination
field has been inserted by Split which is needed
for the next run.
9. Select
Scan
and open the created task in Run Selection. In the
following example, it is called
Tray20Pass2_Run(1/3)
. The first of
three runs of the secondary sort is Tray 20. The following window is
displayed.
