A-61593 September 2007
3-15
15. When finished, close the run and remove the documents in
ascending pocket number out of the pockets and put them back into
the feeder.
16. Select
Next Run
of this fine sort, in this example:
Tray20Pass2_Run(3/3)
, and process the documents again.
17. When finished, remove the documents in ascending pocket order,
paying attention to the sequence.
18. Check the order of the documents; they are sorted according to
BLZ. If the BLZ matches, according to KTO, the fine sorting was
successful.
Colors in the Lookahead
There are four colors in Lookahead:
Jam handling in
Controlled runs
The following jam situations may occur with controlled runs.
•
The document does not match
— the processed document has too
many rejects or substitutions to be identified.
Machine Status:
Too many mismatches
•
The documents appear in the wrong sequence
— if the processed
documents do not appear in the correct sequence, a jam will occur.
Machine Status:
Detected wrong sequence.
NOTE: Using the options of the Compare control jams can be avoided.
Then documents which are not matchable or in the wrong
sequence will be sorted out to a defined pocket.
Color
Meaning
White
The Lookahead interval is the white area. This is where
the scanned documents are searched. The size of the
area is fixed in the Run Definition.
Orange
If the Lookahead interval does not include the entire .rct
file, the remaining part of the .rct file is orange. The
documents in this area are not searched.
Green
Documents belonging to this entry in the .rct file are
already processed.
Gray
This entry in the.rct file is deleted.
