KNECHT HV 203, Operating Instructions Manual

Page: 5 / 70

6
9.1.3 Setting the grinding angle 49
9.1.4 Mounting the grinding plate 50
9.1.5 Clamping cutter knives 51
9.1.6 Basic function of the HV 262 locking mechanism 52
9.1.7 Bringing the HV 262 Universal Belt-Grinding Unit into adjustment position 53
9.1.8 Aligning the cutter knife on the wet-grinding belt 54
9.1.9 Grinding cutter knives 55
9.1.10 Deburring and polishing cutter knives 57
9.2 Grinding sickle-shaped cutter knives on the wet-grinding belt
(convex cutting edge)
58
9.2.1 Locking the carriage 58
9.2.2 Inserting the function disc 58
9.2.3 Setting the grinding angle 58
9.2.4 Mounting the grinding plate 59
9.2.5 Adjusting the swivel range of the grinding plate 60
9.2.6 Enlarging the grinding radius 60
9.2.7 Clamping cutter knives 61
9.2.8 Basic function of the HV 262 locking mechanism 62
9.2.9 Bringing the HV 262 Universal Belt-Grinding Unit into adjustment position 63
9.2.10 Grinding cutter knives 64
9.2.11 Deburring and polishing cutter knives 66
10. Care and maintenance 67
10.1 Cleaning 67
10.1.1 Lubricant table 67
10.2 Maintenance plan (one-shift operation) 67
11. Disassembly and disposal 68
11.1 Disassembly 68
11.2 Disposal 68
12. Service, spare parts and accessories 69
12.1 Postal address 69
12.2 Service 69
12.3 Spare parts 69
13. Appendix 70
13.1 EU Declaration of Conformity 70
Table of Contents