58
9.2 Grinding sickle-shaped cutter knives on the wet-grinding belt
(convex cutting edge)
9.2.1 Locking the carriage
Swivel the locking fork (9-27/1) forward over the
locking bar of the carriage.
It is now secured from being moved.
9.2.2 Inserting the function disc
The function disc (9-28/2) is placed on the locat-
ing bolt (9-28/1).
The nose (9-28/3) of the function disc must face
in the direction of the grinding belt. The toothed
area of the function disc faces the operator.
The grinding plate can be swiveled concentrically
in this position.
9.2.3 Setting the grinding angle
The grinding angle is set on the universal
belt-grinding unit using spacer discs.
Spacer discs for 25° and 27° (9-29/1) are located
on the base plate of the belt-grinding unit.
Figure 9-27
Locking the carriage
Figure 9-28
Inserting the function disc
Figure 9-29
Spacer discs for adjusting grinding
angle
1
1
3
2
1
9. Operating the HV 262
