59
To set the desired grinding angle, place the ap-
propriate spacer disc (9-30/1) on the locating bolt
(9-30/2).
9.2.4 Mounting the grinding plate
NOTE
KNECHT produces a suitable grinding plate
for each knife. KNECHT requires as precise
information as possible on the shape and size
of the knife to be ground. A drawing from
the knife manufacturer is ideal (knives that
can be procured on the free market some-
times deviate from the original contour).
Photos of the entire knife and the knife
inscription are also helpful.
The grinding plate (9-31/2) is placed over the
spacer disc (9-31/1).
The cylindrical pin (9-31/3) of the spacer disc
(9-31/1) must engage in the hole (9-31/4) of the
grinding plate.
If the grinding plate has several locating holes,
mount it so that the cutting segment at the knife
tip is ground first.
Figure 9-30
Setting the grinding angle
Figure 9-31
Mounting the grinding plate
1
2
2
1
4
3
9. Operating the HV 262
