46
8.1 Swiveling the HV 262 Universal Belt-Grinding Unit into
working position
When not working with the Universal Belt
Grinding Unit HV 262, it is swiveled into the
rest position.
The wet grinding belt is thus freely accessible.
To bring it into working position, swivel the
belt-grinding unit to the left until it touches both
stop pins (8-1/1).
8. HV 262 commissioning
All work must be performed by authorized trained personnel.
Observe the locally applicable safety and accident prevention regulations.
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
Serious injury may result. Wear personal protective equipment.
CAUTION
Figure 8-2
Swiveling the HV 262 into working
position
Figure 8-1
HV 262 in rest position
1
1
