55
9.1.9 Grinding cutter knives
Grinding, polishing and deburring releases abrasive particles that can
enter the eyes.
Wear protective glasses.
CAUTION
Switch on the grinding machine (9-19/1) and
coolant unit (9-19/2).
Move the grinding unit from adjustment position
to grinding position “1” (9-20/3).
To do so, press the locking lever (9-20/1) with
your thumb and turn the hand wheel (9-20/2)
clockwise towards the grinding belt with your
remaining four fingers until grinding position “1”
is reached.
Release the locking lever (9-20/1).
With linear cutter knives, each cutting segment is
ground separately (1 segment = corner to corner).
Using the grinding lever (9-21/1), press the knife
against the grinding belt (9-21/2) with moderate
force and move it evenly over the grinding belt.
Grind until a small burr forms on the cutting edge.
Figure 9-19
Switching on the grinding machine
and coolant unit
1
2
9. Operating the HV 262
Figure 9-20
Bringing the grinding unit into
grinding position “1”
Figure 9-21
Grinding burr
3
2
1
2
1
