Figure 9-25
Swiveling the cutter knife to the
next cutting segment
1
57
Slightly loosen the grinding lever (9-25/1) and
swivel the knife to the next cutting segment.
Retighten the grinding lever (9-25/1).
Grind all cutting segments as described below:
Bring the HV 262 Universal Belt-Grinding Unit
into adjustment position “0” (see chapter
9.1.7).
Align the cutter knife on the wet-grinding
belt (see chapter 9.1.8).
Grind cutter knives (see chapter 9.1.9).
Repeat process for each cutting segment.
9.1.10 Deburring and polishing cutter knives
Deburr and polish cutter knives on the finned
brush. See the technical documentation for the
S 200 Universal Wet-Grinding Machine, chapter
7.7.
9. Operating the HV 262
Figure 9-26
Deburring and polishing the cutter
knife on the finned brush
