45
When the first segment is completely ground,
swivel the knife to the next segment.
Adjust the grinding angle (see chapter 7.2.4).
If necessary, reclamp the grinding plate.
To do so, unclamp the knife. Reclamp the grinding
plate as described in chapter 7.2.1 in the locating
hole that matches the next cutting segment.
Grind all cutting segments as described
below:
Adjust grinding angle (see chapter 7.2.4).
Grind cutter knives (see chapter 7.2.5).
Repeat process for each cutting segment.
The cutter knife is now pre-ground.
Before it can be deburred and polished, the fine
grinding must be carried out on the HV 262
Universal Belt Grinding Unit (see chapter 9.2).
Figure 7-49
Swiveling the cutter knife to the
next cutting segment
Figure 7-50
Convex pre-ground cutter knife
7. Operating the HV 203
