50
9.1.4 Mounting the grinding plate
NOTE
KNECHT produces a suitable grinding plate
for each knife. KNECHT requires as precise
information as possible on the shape and size
of the knife to be ground. A drawing from
the knife manufacturer is ideal (knives that
can be procured on the free market some-
times deviate from the original contour).
Photos of the entire knife and the knife
inscription are also helpful.
The grinding plate (9-6/1) is placed over the spacer
disc (9-6/2).
The cylindrical pin (9-6/4) of the spacer disc (9-6/2)
must engage in the hole (9-6/3) of the grinding
plate.
Turn the grinding lever (9-7/1) clockwise onto the
locating bolt and tighten it.
Figure 9-6
Mounting the grinding plate
Figure 9-7
Clamping the grinding plate
1
4
3
2
1
9. Operating the HV 262
