KIKUSUI Electronics Corp.
284
SYST:SLE
Turns the sleep function on and off.
Even if the sleep function is turned off, you can activate the sleep function by sending
the SYST:SLE:EXEC command.
Use SYST:SLE:TIME to set the time that must elapse before the PCR-WE enters
sleep mode.
Command
SYSTem:SLEep[:STATe] <boolean>
SYSTem:SLEep[:STATe]?
Parameters
Parameter
Value:
ON(1)
The sleep function turns on.
OFF(0) The sleep function is turned off (default).
Settings are reset to default values when an *RST command is sent.
Response: NR1
