[SOURce:]VOLTage Command
PCR-WE Interface Manual
201
VOLT:TRIG
Sets the AC voltage to change to when INIT:TRAN or a software trigger is sent.
This command is valid for AC output.
This command is invalid when the combined value with the DC voltage is outside the
allowable range (L range: -222.5 V to 222.5 V, H range: -445.0 V to 445.0 V).
Command
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude] <numeric>[,(@chan-
list)]
[SOURce:]VOLTage[:LEVel]:TRIGgered[:AMPLitude]?
Parameter
Value:
0 to 157.5 AC voltage in the L range
0 to 315.0 AC voltage in the H range
(The default value is 0.)
Unit:
V
Settings are reset to default values when an *RST command is sent.
Example
VOLT:TRIG 120
Response: NR3
