KIKUSUI Electronics Corp.
272
SYST:EXT:SSIGIO:MAP
Maps SIGNAL IO channels (DIO.1, DIO.2).
Command
SYSTem:EXTernal:SSIGIO:MAP <NRf_port>,<character_inout>,<character_
map>
SYSTem:EXTernal:SSIGIO:MAP? <NRf_port>
Parameter
<NRf_port>
Value 1 to 2 Channel number to be mapped (DIO.1, DIO.2)
Parameter
<character_inout>
Value:
IN
Control using external contacts
OUT
Monitors the operation status
DISable
Disabled (default)
Parameter
<character_map> (<character_inout> is set to IN)
Value:
SYNCCLK
Output reference phase signal
SEQTRIGIN
Sequence trigger input
OUTCTL
Output on/off
SEQEXEC
Sequence run/stop
ALMCLR
Alarm clear
EXTALM
External alarm input
WIRCTL_1P
Output method change (single-phase)
WIRCTL_1P3WOutput method change (single-phase three-wire)
WIRCTL_3P
Output method change (three-phase)
VRANGE
Output range change
RCL_A
Recall A memory
RCL_B
Recall B memory
RCL_C
Recall C memory
OUTINH
Output on inhibit
USERPROGIN Programmable signal in
Parameter
<character_map> (When <character_inout> is set to OUT)
Value:
STDCLK
Output reference phase output
SEQTRIGOUT Sequence trigger output
OUTON
Output on status
IPKLIM
Current peak limit status
OVERLOAD
Overload status
BUSY
Busy status
