OUTPut Command
PCR-WE Interface Manual
107
OUTP:PHAS:ON
Enables or disables output-on phase control.
If the signal source is set to external signal source VOLT:EXT:INP:EXTDC:SIGN:-
SOUR EXT), this command is invalid.
Use OUTP:PHAS:ON:LEV to set the output-on phase angle.
Command
OUTPut:PHASe:ON[:STATe] <boolean>
OUTPut:PHASe:ON[:STATe]?
Parameter
Value:
ON(1)
Enables output-on phase control
OFF(0) Disables output-on phase control (default)
Settings are reset to default values when an *RST command is sent.
Example
OUTP:PHAS:ON ON
Response: NR1
