Kikusui PAD-L III Series, Operation Manual

Page: 10 / 132

VIII Contents PAD-L
Chapter 4 Applied Operation _________________________________ 4-1
4.1 Remote sensing 4-2
4.2 CV mode by remote control 4-4
4.2.1 Output voltage control (I) with external resistor 4-4
4.2.2 Output voltage control (II) with external resistor
4-6
4.2.3 Output voltage control with external voltage 4-9
4.3 Output ON/OFF control 4-12
4.3.1 Output ON/OFF control (I) 4-12
4.3.2 Output ON/OFF control (II) 4-14
4.4 CC mode by remote control 4-16
4.4.1 Output current control with external resistor
4-16
4.4.2 Output current control with external voltage 4-18
4.5 Master-slave-control parallel operation 4-22
4.6 Master-slave-control series operation 4-26
4.7 Shutting off the POWER switch 4-30
4.8 Constant current charge of a battery/capacitor 4-32
Chapter 5 Names and Functions of Controls _____________________ 5-1
5.1 Front panel5-2
5.2 Rear panel 5-6
Chapter 6 Maintenance _____________________________________ 6-1
6.1 Cleaning 6-2
6.2 Inspection 6-2
6.3 Adjustment 6-3
6.3.1 Test equipment required
6-3
6.3.2 Environment 6-3
6.3.3 Removing the cover 6-4
6.3.4 Adjustment procedure 6-6
6.4 Replacing the input fuse (TYPE III and TYPE IV models only) 6-14
6.5 Malfunctions and Causes 6-17
Chapter 7 Specifications ____________________________________ 7-1
7.1 TYPE III models specifications 7-2
7.2 TYPE IV models specifications 7-6
7.3 TYPE V models specifications 7-10
Index ___________________________________________________ I-1