1-6
Setup
PAD-L
1.3
Precautions for moving
When moving or transporting the power supply to an installation site, observe the
following precautions.
Turn the POWER switch off.
Moving the power supply with the power on may result in electrical shock or
damage.
Remove all wirings connected.
Moving the power supply with cables connected may break the cables or cause the
power supply to fall, resulting in injury.
Unlocking the stoppers
Before moving the power supply, you must unlock the stoppers used to secure the
power supply at the installation site (caster locks and/or stopper bolts). Any attempt
to move the power supply without unlocking the securing devices may cause it to
topple over, resulting in injury or equipment damage.
Do not move the power supply by yourself; enlist assistance.
Even the lightest TYPE III model in the PAD-L series is approximately 60 kg in
weight. Moving the power supply requires at least two persons. Never attempt to
move the power supply by yourself. Watch for inclined surfaces and steps.
Summary of Contents for PAD-L III Series
