Keysight U2741A, Programmer'S Reference Manual

Page: 86 / 169

6 SENSe Subsystem
86 Keysight U2741A Programmer’s Reference Guide
[SENSe:]CURRent[:DC]:RESolution
Syntax
[SENSe:]CURRent[:DC]:RESolution <range|MIN|MAX|DEF>
[SENSe:]CURRent[:DC]:RESolution? {MIN|MAX}
Description
This command selects the measurement resolution for DC current measurements.
Specify the resolution in the same units as the selected measurement function,
not in number of digits.
Parameter
Remarks
– For the
<resolution>
parameter, you can substitute
MIN
or
MAX
for a
numeric value.
MIN
selects the smallest value accepted, which gives the
highest resolution;
MAX
selects the largest value accepted, which gives the
least resolution.
– The U2741A sets the resolution to 5.5 digits after a factory reset
(
*RST
command).
Examples
CURR:RES 0.00003
//Sets the measurement resolution to
30 μ A
CURR:RES
//Queries the selected resolution
Typical Response:
+3.00000E-05
See Also
CONFigure:CURRent[:DC]
Item Type Range of values Default value
range Numeric 3.00e–5, 2.00e–5, 1.00e–5, 5.00e–6, 2.00e–6, 1.50e–6 1.50e– 6