Keysight U2741A, Programmer'S Reference Manual

Page: 80 / 169

6 SENSe Subsystem
80 Keysight U2741A Programmer’s Reference Guide
[SENSe:]CURRent:AC:RANGe:AUTO
Syntax
[SENSe:]CURRent:AC:RANGe:AUTO <state>
This command disables or enables autorange for AC current measurements.
Autorange is convenient because the U2741A automatically selects the range for
each measurement based on the input signal detected.
[SENSe:]CURRent:AC:RANGe:AUTO?
This command queries the autorange mode for AC current measurements.
Parameter
Remarks
– Autorange thresholds:
– With autorange enabled, the U2741A selects the appropriate range based on
the input signal detected.
– Selecting a discrete range (see
[SENSe:]CURRent:AC:RANGe
command) will
disable autorange.
– The U2741A enables autorange after a factory reset (
*RST
command).
Item Type Range of values Default value
state Boolean {OFF|0|ON|1}
OFF or 0: Disables the auto mode
ON or 1: Enables the auto mode ON
Lower range at: <10% of range
Upper range at: >120% of range