Keysight U2741A, Programmer'S Reference Manual

Page: 158 / 169

12 SCPI Error Messages
158 Keysight U2741A Programmer’s Reference Guide
–130 Suffix error
Generic suffix error
–131 Invalid suffix
A suffix was incorrectly specified for a numeric parameter
–134 Suffix too long
The suffix contains more than 12 characters
–138 Suffix not allowed
A suffix is not supported for this command
–140 Character data error
Generic character data error
–141 Invalid character data
Either the character data element contains an invalid character, or the element is not valid
–144 Character data too long
The character data element contains more than 12 characters
–148 Character data not allowed
A discrete parameter was received, but a string or numeric parameters was expected
–150 String data error
Generic string data error
–151 Invalid string data
An invalid character string was received. Check that the string is enclosed in quotation marks
–158 String data not allowed
A character string was received, but is not allowed for this command
–160 Block data error
Generic block data error
–161 Invalid block data
The number of data bytes sent does not match the number of bytes specified in the header
–168 Block data not allowed
Data was sent in arbitrary block format but is not allowed for this command
Table 12-1 Command Errors (these errors set Standard Event Status register bit #5) (continued)
Error number Command errors