Keysight B2980B User’s Guide, Edition 1
199
Front Panel Reference
System Key Group
System Key Group
Press the System key to display the following softkeys used for several system
setups.
Error
Displays the following softkeys to view or clear errors.
Log
Displays the Error Log dialog box which displays the SCPI
errors.
Clear
Clears the error buffer immediately.
Reset
Initializes the B2980.
Press the Reset softkey to display a confirmation dialog box and press one of the
following softkeys to perform the initialization.
To cancel the initialization and close a confirmation dialog box, press the
Cancel/Local key.
Display
Initializes the display settings.
H/W
Initializes the hardware settings.
ALL
Initializes all settings.
Cal/Test
Displays the following softkeys for performing self-calibration or self-test.
Self-Cal
Performs self-calibration.
Self-Test
Performs self-test.
Press the softkey to display a confirmation dialog box. Press the OK softkey to
start self-calibration or self-test, or the Cancel/Local key to cancel.
PLC
Specifies the power line frequency. The present setting is indicated by an asterisk
on the softkey label. Press the key to set up the following.
50 Hz
Specifies the power line frequency 50 Hz.
60 Hz
Specifies the power line frequency 60 Hz.
Auto Detect
Checks the AC power line frequency, and then sets the
detected frequency (50 Hz or 60 Hz) to the power line
frequency.
Summary of Contents for B2980B Series
